The TQC Bresle Kit - Chloride Test Kit includes all the necessary equipment for assessing the level of soluble salts on blast-cleaned surfaces prior to coating. The TQC Bresle Kit - Chloride Test Kit is complying with the ISO 8502-6 that describes the a method of extracting, for analysis, soluble contaminants from a surface by use of flexible cells in the form of adhesive bresle patches, which can be attached to any surface, regardless of its shape and its orientation. The method described is suitable for use in the field to determine the presence of soluble contaminants before painting or a similar treatment. Inside the TQC Bresle Kit - Chloride Test Kit is a conductivity gauge used for the assessment of soluble salt ions as chlorides, sulphates and nitrates. The Bresle Method described in the ISO 8502-6 and ISO 8502-9 standard, states that the conductivity is mainly directly proportional to the concentration of dissolved chloride ions in the solution.

Contamination of blast-media:
The TQC Bresle Kit - Chloride Test Kit can also be used to determine the contamination of blast-media in use. A too high level of salts in the recycled abrasive media or water can re-contaminate the surface being cleaned. Two standards ISO 11127-6 and ISO 11127-7 describe the determination of water-soluble contaminants by conductivity measurement and the determination of water-soluble chlorides.

Scope of supply:
TQC Digital conductivity meter, 25x TQC Bresle Patch, 6x 25ml beaker, 200ml distilled water, 20ml syringe with needle, 2,5ml syringe with needle, bresle are mask magnet, bresle test instruction sticker, calibration and rinse solution.